Creating 3D images of different angles of a room
Did you know....
...that you can generate several 3D images from a drawing to show different angles of a room?
Example
You are working with a larger drawing and would like to produce multiple 3D images of different rooms and angles. You then wish to include these in your report.
Creating Photo Series
The easiest way to create several 3D-images of a room is to create photo series. Follow the steps below:
1. Go to the 3D component tab and click the Photo Series button. The Photo Series dialog box appears.
2. Set the desired perspective of your drawing in the 3D view by using for example the Circle Camera around Target tool.
3. Click the New button in the Photo Series dialog box to capture the 3D image. The drawing appears as a miniature image in the dialog box.
4. Change the perspective of the 3D view and click the New button once more. Repeat this procedure until you have captured all the different angles you need.
|
In the Photo Series dialog box it is possible to change the settings for the photos, such as naming the images and changing the order they are presented in.
If you have alternative drawings you can choose to create one photo series for each alternative by selecting the second option in the top of the Photo Series dialog box.
|
Including Photo Series in Your Report
Follow the steps below to include the photo series in your report:
1. If you have the Photo Series dialog box open, close it.
2. In the File menu, select Print Reports and click the Report Settings tab.
3. Select the Perspective option under the heading Document contents in the left column. New options appear to the right.
4. Select the Photo Series option in the Render drop down menu. The images in the photo series will then be added to your report.
Get Email & RSS Updates
Receive email updates on the latest Tips and Hints for CET Designer by submitting your email in this form.
You can also receive the updates through the RSS feed 
.
Latest Tips and Hints
-
November - 2011
-
October - 2011
-
May - 2011
-
January - 2011
-
November - 2010
Comments
Post new comment